Use this bar to show information about your cookie policy.
Description
83 Foamr Auto + Boat Wash Shampoo - 16oz
High-suds, pH-neutral formula safely loosens dirt, grime, and scum from a variety of both automotive and marine surfaces.
Collinite’s Foamr is a pH-neutral, highly concentrated & versatile shampoo that produces a lasting foam and ultra-rich gloss. This high-sudsing, slick formula safely loosens dirt, grime, and scum from your paintwork and fiberglass, while providing a swirl-free finish. Designed for preserving a wax, sealant, or ceramic coating. For use on all exterior surfaces, including paint, clear coat, chrome, PPF, matte, gel coat, plastic, and glass. Designed for both foam cannon and hand/bucket use.
Directions: Make sure the vehicle/vessel’s surface is cool (not hot) to the touch. Hand/Bucket Use: Mix 1-1.5 oz. per 2 gallons of water. Set the hose nozzle to “jet/stream” and spray directly into the bucket to create foam. Using the desired wash mitt, wash the surface thoroughly from top to bottom. Rinse each section with the hose/water. *Using a 2nd rinse bucket (clean, cool water) will help clean/loosen debris from the mitt between sections. When complete, dry all remaining water from the surface with a drying towel to prevent water spots. Foam Cannon Use: Mix 3-4 oz into 30 oz of water in the cannon reservoir. Shake well to properly distribute soap. Cover the entire surface with the foam cannon and allow it to cling/dwell for 2-4 minutes. Rinse with water.
Features:
Automotive and marine use
pH-neutral formula
Designed for hand and foam cannon use
Removal of dirt, grime, and scum
Will not degrade wax, sealant, or ceramic coating
Designed for use on paint, clear coat, chrome, PPF, gel coat, plastic, and glass
Not for use on interior surfaces, upholstery, or seating
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)